Another Kel-Tec on the way

Moderators: FergusonTO35, farmkid, jeffchance, Flowmaster, 356, pockets, martin08, adam01364, Mr Saturday Night Special

Another Kel-Tec on the way

Postby FergusonTO35 » Sat Feb 10, 2018 6:41 pm

Well, I'm back in the .32 Auto game. I sold my .32's a couple of years ago to pay off bills but kept my molds, brass, and boolits. Since that time, I have felt like my arsenal has a yawning chasm in it that the .380's just can't fill. Stopped in a pawn shop today and they had a LNIB Kel-Tec P32 under the glass for $200.00 so I layawayed it. I'm looking forward to bailing it out, planning to try Clays in it.
"If magic is to be defined as the use of ineffective means to allay anxiety when effective ones are not available, then we must conclude that no society will ever be completely free from it." -Keith Thomas, Religion and the Decline of Magic, 1971.
User avatar
FergusonTO35
FORUM BENEFACTOR and MOD
 
Posts: 4093
Joined: Mon May 07, 2012 8:34 am
Location: Salvisa, KY

Re: Another Kel-Tec on the way

Postby Banned for Life » Sat Feb 10, 2018 7:21 pm

Almost bought a p32 but the amt backup 380 drew me in a little more.

One of these days though!
Banned for Life
Zamak Hoarding Weirdo
 
Posts: 354
Joined: Tue May 08, 2012 12:07 pm

Re: Another Kel-Tec on the way

Postby FergusonTO35 » Mon Feb 12, 2018 3:34 pm

You never see used P32's for sale around here, much less LNIB. It even still has all the bluing on the bolt face, a bit of copper staining in the bore is the only sign it has been fired.
"If magic is to be defined as the use of ineffective means to allay anxiety when effective ones are not available, then we must conclude that no society will ever be completely free from it." -Keith Thomas, Religion and the Decline of Magic, 1971.
User avatar
FergusonTO35
FORUM BENEFACTOR and MOD
 
Posts: 4093
Joined: Mon May 07, 2012 8:34 am
Location: Salvisa, KY

Re: Another Kel-Tec on the way

Postby David Vincent » Mon Feb 12, 2018 9:04 pm

P32s are good little pocket guns. If they had steel mag catches and second strike capabities they would be almost perfect. Its one of the few good guns keltec makes that are durable.

P32s and P11s are two guns that keltec sets the bar IMO. I am a big fan of the P11 especially. Both are somewhat forgotten and overlooked gems on the firearms market. Parts are cheap and easily available.....been made for a long time....great aftermarket accessories etc. etc.
User avatar
David Vincent
500+ Rounds Club. Zamak Hoarding Weird+
 
Posts: 597
Joined: Sun May 20, 2012 6:36 pm

Re: Another Kel-Tec on the way

Postby FergusonTO35 » Tue Feb 13, 2018 7:47 pm

Yep, totally agree. I did replace the mag catch on my old one, the sharp edge of the mag catch slot will eventually wear it out. I think on this one, I may try putting a dab of JB weld on it in this area. JB Weld is pretty hard once it sets up.
"If magic is to be defined as the use of ineffective means to allay anxiety when effective ones are not available, then we must conclude that no society will ever be completely free from it." -Keith Thomas, Religion and the Decline of Magic, 1971.
User avatar
FergusonTO35
FORUM BENEFACTOR and MOD
 
Posts: 4093
Joined: Mon May 07, 2012 8:34 am
Location: Salvisa, KY

Re: Another Kel-Tec on the way

Postby David Vincent » Tue Feb 13, 2018 10:24 pm

its too bad nobody makes a steel mag catch for P32s. Twisted industries has an aluminum one but it really needs to be steel. The first thing I do whenever I pick up another p11 is drop in a stainless mag catch. Then I put in a RTK trigger to deal with the overtravel because I cannot hit with them with the factory overtravel on the oem trigger.

Its strange that none of the other clone companies put out a 32. Taurus used to have one but they dumped it and went strictly with the 380. Ruger never had one. Beretta dropped its 32acp conversion for the PIco. 32acp out of these guns is really the superior choice IMO. It makes them shootable, controlable, easier accuracy and the the balistic advantage between 32 and 380 out of these small pistols is practically nill. Somehow this notion of 380 being so much better than 32 out of micro pocket pistols has stuck and folks treat 32acp like its not effective. I still wish the 32naa would have taken off. That was a pretty wicked pocket pistol round.

Good thing is you have a Keltec. Parts are never a problem and are innexpensive from the factory. The major components such as slide and barrel are made from very quality steel so failures are rare. Subframes hold up. Plastic grips hold up. They are just really well designed pistols. I cant say that about the PF9 and the PMR. KT has kind of gone down a level in those pistols IMO. Lots of problems in those guns in almost every way.
User avatar
David Vincent
500+ Rounds Club. Zamak Hoarding Weird+
 
Posts: 597
Joined: Sun May 20, 2012 6:36 pm

Re: Another Kel-Tec on the way

Postby FergusonTO35 » Thu Feb 15, 2018 3:45 pm

Yep, agree totally. .32 Auto is a much better choice in a gun this size/
"If magic is to be defined as the use of ineffective means to allay anxiety when effective ones are not available, then we must conclude that no society will ever be completely free from it." -Keith Thomas, Religion and the Decline of Magic, 1971.
User avatar
FergusonTO35
FORUM BENEFACTOR and MOD
 
Posts: 4093
Joined: Mon May 07, 2012 8:34 am
Location: Salvisa, KY


Return to Inexpensive guns that are not SNS, including Taurus, Charter, Kel-tec, Rossi......

Who is online

Users browsing this forum: No registered users and 2 guests